^{Isolation Barriers}

^{The diagram below illustrates isolation for a typical medical device with an applied part. Two isolation barriers are required to ensure that the applied part is isolated from the ground and meets the patient leakage current limits during normal and single fault conditions. The primary isolation barrier for this type of equipment can be provided by an ANENPower supply, while the secondary isolation barrier is provided by another system component or ANENPOWER solution.}

^{Emission and Immunity Specifications}

^{IEC55011/IEC55022 Limits for conducted and radiated emissions
IEC61000-3-2 Limits for harmonic current emissions
IEC61000-3-3 Limitation of voltage changes,voltage variations and flicker
IEC61000-4-2 Electrostatic discharge immunity
IEC61000-4-3 Radiated immunity
IEC61000-4-4 Electrical fast transient immunity
IEC61000-4-5 Electrical surge immunity
IEC61000-4-6 Conducted disturbance immunity
IEC61000-4-8 Immunity to power frequency magnetic field
IEC61000-4-11 Immunity to voltage dips, short interruptions and variations on supply line}